077: HS-200-LV / 2x 15cm 8AWG (Shipment 15th of August 2026) 0 - 6p -> Pixhawk

0 - 6p -> Pixhawk 2

47mm x 18mm x 11mm / 9g with cables and shrinking tube

1x Alarm output cable / Molex 1

Connected to the sensor are 2x15cm AWG8 wire (red) as a standard

077: HS-200-LV / 2x 15cm 8AWG (Shipment 15th of August 2026) 0 - 6p -> Pixhawk200A Current measurement sensor board, based on Allegro Hall Sensor ACS 250U. The voltage reading of the LiPo is optimized for up to 6S LiPo packs. This Sensor board needs a power supply. So please select the matching BEC according to your preference from the BEC section. The BEC will also power the flight controller as well as the attached equipment like GPS, telemetry etc. Connected to the sensor are 2x15cm AWG8 wire (red) as a standard. The board